Elevators
Check below for Hallmark Equipment's web listings of used Elevators.
If you do not see what you are looking for listed on this page, contact Hallmark Equipment at 408-782-2600 or click to use our contact form. We receive new machinery daily!
Click on the Inventory Number of the Elevator you are interested in for photos and a link for more information or a price quote.
| Inventory # | Product |
|---|---|
| Click Inventory # to See Photos | |
| Showing Products 1 to 10 of 16 | |
| 1 2 Next » | |
| 6480 | 24'' wide S/S Laport chain cleated belt elevator - 2'' cleats on 12'' centers, Legs are adjustable down 9'', infeed is 23'' high and dischage is 76'' high, 5'' high side rails, 115/230 volt single phase gear head motor drive, infeed leg is 6' long, elevator leg is 80'' long and elevates at 45 degrees, unit is approx. 11 1/2' long overall (#6480) |
| 4365 | A.K. Robbins / Vanmark vertical hydro lift elevator destoner - 16" diameter screw, 21 ft. overall length, S/S. (#4365) |
| 5369 | Allen Kenasco belt elevator - Allen Kenasco stainless steel cleated belt elevator, 24 inch wide x 12 feet long belt with catch hopper. (#5369) |
| 6262 | Cleated belt elevator - 21 inches wide by 75 inches long, elevates to approximately 6 feet, 2 foot infeed and discharge leg, Intralox type plastic belt, 2 inch cleats on 10 inch centers, all S/S, 8 inch high sides, gear head motor drive. (#6262) |
| 6264 | Cleated belt elevator - 21 inches wide x 75 inches long, elevates to approximately 6 feet, 2 inch infeed and discharge leg, Intralox type plastic belt, 2 inch cleats on 10 inch centers, all S/S, 8 inch high sides, gear head motor drive. (#6264) |
| 6259 | Cleated belt elevator - 24 inches wide x 8 feet long, 2 inch cleats on 9 inch centers, 4 inch high sides, all S/S, belt driven by a power pulley, feeds at 3 inches high and discharges at 80 inches high. (#6259) |
| 6710 | Cleated belt elevator - 12" wide by 7' long, S/S frame with Intralox belt, 2" cleats on 18" centers, 1 1/2" high side panels, hydraulic drive (#6710) |
| 6496 | Flood tank washer elevator - All S/S, 18'' wide plastic belt with 2'' cleats on 12'' centers, feed hopper is 3' deep, feeds at 6' and discharge at 90'', 3/4 hp gear head motor 230/460 volt (#6496) |
| 7055 | Heat and Control cleated belt elevator - 2" cleats on 12" centers, plastic Intralox belt is 18" wide useable, S/S construction, lifts to 15.6', feed leg is 12" high and 4' long, discharge leg is 2' long, elevates at a 45 degree angle in 20', 1.5 hp gear head motor 220/440 volt (#7055) |
| 6467 | Heinzen 24'' by 10' S/S elevator - Belt has 3'' high cleats on 12'' centers, 5' wide feed hopper, feeds from the rear at 44'', discharges at 93'', adjustable legs, gear head motor drive (#6467) |
| Showing Products 1 to 10 of 16 | |
| 1 2 Next » | |