Hallmark Equipment

View all categories « return to Mixers / Blenders

Liquid Blenders / Mixers

Check below for Hallmark Equipment's web listings of used Liquid Blenders.

If you do not see what you are looking for listed on this page, contact Hallmark Equipment at 408-782-2600 or click to use our contact form. We receive new machinery daily!

Click on the Inventory Number of the Liquid Blender you are interested in for photos and a link for more information or a price quote.

Inventory # Product Name
Click Inv # to See Photos
Showing Products 1 to 8 of 8
5894APV Crepaco 80 cu. Ft. blender - Model 80-FB serial number K-1551, 1996 vintage, 80 cu. Ft. working capacity, USDA approved, 75 PSI jacket, all wetted surfaces are constructed of T316 stainless steel, and the balance of the unit with the exception of the drive mechanism is constructed of T-304 stainless steel. All welds are continuous, crack and crevice free, domed cover, 15 HP washdown duty gear motor operating at approximately 23 final RPM. (#5894)
6086C.E. Howard Horizontal Paddle Type Liquid Blender - 700 gallon capacity, serial number R1108-2, stainless steel construction, Hub City shaft mounted gear reducer with hydraulic motor, bottom slopes to 3 inch center outlet with ball valve, three inner paddles- 4 inch by 3/8 inch and three outer paddles- 3 inch by 3/8 inch, 42 inch by 84 inch by 50 inch deep inside dimensions, stainless steel construction (#6086)
6385Crepaco liquifier right angle drive - 40 hp 1770 rpm 460 volt 60 cycle, 40 inches from center of motor to center of blade shaft (#6385)
6955Dixie Mixers - 200 gallon each, 3 squirrel cage mixers per tank, all S/S, tanks are 3' dia. by 4' deep each, on S/S platform 7.5' wide by 8' long with aluminum diamond plate deck. unit was mfg. in 1974 by South Valley Mfg. serial # 925-74, Baldor 25 hp motors 230/460 volt 3 phase 4000 rpm max. (#6955)
5217Norman 50 gallon liquefier - Serial number DSJIC-50-526, low pressure jacket, all stainless steel, no motor, type DS impeller (#5217)
5863Sharpe mixer - Model 1CB105-53 serial number 41312-5, 1 HP three phase 230/460 volt 1735 RPM motor, 2-1/8" bore, 40" diameter four blade mild steel mixing propellers to fit a 3-1/2" diameter shaft, 12" square mounting flange, 34 final RPM, never used (#5863)
5864Sharpe mixer - Model 1CB105-53 serial number 41312-7, 1 HP three phase 230/460 volt 1735 RPM motor, 2-1/8" bore, 40" diameter four blade mild steel mixing propellers to fit a 3-1/2" diameter shaft, 12" square mounting flange, 34 final RPM, never used. (#5864)
5856Stainless steel tank - 5’ square x 6’ deep with rounded corners, approximately 800 gallon capacity, cone type bottom with 3" flanged outlet, blade type agitator, mild steel blades and shaft, 15 HP 230/460 volt drive 1750 RPM to a Lightnin gearbox model 74Q 15VM serial number 752696, 16.6:1 ratio (#5856)
Showing Products 1 to 8 of 8